Ford 6.0 FICM Repair
This is a Ford 6.0 FICM repair service for a 2003, 2004, 2005, 2006, 2007, 2008, or 2009 Super Duty Powerstroke fuel injection control module (FICM) for a no start / rough start condition or the P0611 diagnostic trouble code.
FICM 6.0 Troubleshooting & FAQs:
Does your Ford 6.0 Powerstroke diesel run rough until it has warmed up?
If your Ford 6.0 runs rough until it reaches operating temperature this may be a strong indication it is time for a FICM repair.
Do you receive a P0611 error code or other FICM related codes when you scan your truck?
In addition to the P0611 error code, a faulty FICM can also trigger low voltage on the injectors causing the P0261, P0264, P0267, P0270, P0273, P0276, P0279 & P0282 codes.
What is the cause of failure on a FICM, and will it need to be repaired again in the future?
We repair both the power side as well as the logic side that fail due to faulty components. Since we address the ROOT CAUSE of this failure, we can stand behind our FICM repairs with confidence by offering a 5 year warranty.
How do I know my FICM will work when I get it back?
We test each unit on arrival to ensure that we are not rebuilding a unit that is healthy, and each unit is tested on an actual Ford 6.0 diesel truck after the repair to ensure that it is functioning 100% properly.
Does the FICM need to be reprogrammed once I get it back?
The benefit of this FICM repair service is not only saving hundreds of dollars, but also there is NO NEED TO REPROGRAM OR FLASH YOUR FICM! Just bolt it back on and you’re back in business!
Can I just exchange my FICM for another one?
Yes, we offer rebuilt FICMs that ship immediately! The FICM exchange is a completely refurbished and pre-programmed replacement fuel injection control module for your 2003-2009 6.0L Ford Super Duty with our 5 year warranty.
Do you offer custom FICM tuning?
We currently offer four different Power Hungry Performance (PHP) custom tunes. You also have the option to keep your current programming or have us program your FICM to the latest Ford stock tune. Click here to read more about FICM tunes.
Do I need a new FICM relay?
We recommend replacing the FICM relay if your truck has over 100,000 miles. This is often overlooked but can cause a no start condition. It is located in the fuse box on the drivers side fender well in the engine bay. Better safe than sorry!
- Due to popular demand, we can increase the output voltage to your injectors to 58V.
- Cold weather starting performance will be improved with the 58V modification.
- We make no claims of increased horsepower with the increase in voltage. We have two 6.0L trucks in our shop (early and late build), and neither show any notable improvement in driving performance.
How to test & remove the fuel injection control module (FICM) from a 2003, 2004, 2005, 2006, 2007, 2008, & 2009 Ford 6.0 Powerstroke Super Duty. Visit our site at http://www.CircuitBoardMedics.com for more information or to have us repair your FICM for P0611, P0261, P0264, P0267, P0270, P0273, P0276, P0279, and P0282 diagnostic trouble codes. These codes are not always present with a failed, low voltage, FICM. If your Powerstroke 6.0 runs rough until it warms up, then FICM repair is likely needed. This video shows how to test 4 pin and 7 pin FICM's. Circuit Board Medics will rebuild the FICM to run strong!
Ford 6.0 FICM ...How to test & remove the fuel injection control module (FICM) ...
We can repair all FICMs used on 6.0L diesel engines.
Note: This is NOT a complete list. If you do not see your part number listed, please call us and we can check on your unit. 800-547-2049
Our no-hassle warranty covers your FICM for five full years. If your FICM fails anytime within five years, we will repair it again. In the rare occasion that it is not repairable, we will either replace the circuit board entirely or refund the cost of the repair, at our discretion. See Details...