2008 - 2015 Mazda CX-9 3.7L PCM ECM Repair
This is a repair service for the Powertrain Control Module, (PCM) from a 2008, 2009, 2010, 2011, 2012, 2013, 2014, or 2015 Mazda CX-9 3.7L V6 that has been damaged by a failed ignition coil. This is the most common problem with the ECM from these vehicles, and it is often indicated by one or more of the following diagnostic trouble codes: P0351, P0352, P0353, P0354, P0355, P0356.
Our rebuild service is the easiest way to get you back on the road and the ONLY way to avoid a trip to the dealership.
- There is NO PROGRAMMING REQUIRED!
- Your existing keys will work upon re-installation.
Ignition Coils and Spark Plugs:
If the PCM has been damaged by a failed ignition coil, then all 6 coils must be changed at the same time as the PCM. We strongly recommend using OEM replacement ignition coils and spark plugs.
Even though damage to the PCM is typically caused by only one coil, all 6 coils and spark plugs MUST be replaced prior to re-installing the PCM to prevent premature failure of the computer again. Once a coil fails, the remaining 5 are not far behind.
This repair is ONLY for the above listed condition. If you are having any problems other than this, please call us at 800-547-2049.
Some Edge PCM Part Numbers are below. This is NOT a complete list, so if you do not see your part number listed, please call us 800-547-2049 .
Our no-hassle warranty covers your repair for a full year. If the repair fails anytime within a year, we will repair the item again. In the rare occasion that the item is not repairable, we will either replace the circuit board entirely or refund the cost of the repair, at our discretion. See Details...