GMC Kelsey Hayes 325 ABS Module Repair
This is a repair and upgrade service for the Kelsey Hayes 325 ABS module. This module is found on many GM vehicles, including the Sierra, Suburban, Sonoma, and Envoy. The common failure of the module causes the ABS pump to run constantly or a C0265 error code . The ABS module is also commonly referred to as an electronic brake control module (EBCM).
IMPORTANT: ABS system problems can be caused by a variety of things on your vehicle, so please read the following information carefully before placing your order!!
This repair service is for any Kelsey Hayes 325 ABS module that is causing the ABS pump to run constantly or triggering a C0265 diagnostic trouble code when the vehicle is scanned for error codes. Just having an ABS light or BRAKE light illuminated on the dash does not mean that the ABS module is faulty. If you are having problems other than the C0265 diagnostic trouble code or pump running constantly, please call us at 800-547-2049 for further troubleshooting.
If the ABS pump is running constantly, we recommend finding the fuse for the ABS pump and removing it to prevent the pump from burning out. In most vehicles, this fuse is located in the fuse panel under the hood (in the engine compartment), and is a 50A-60A fuse.
http://circuitboardmedics.com/kelsey-hayes-325-abs-module-repair-c0265-ebcm/ Removal instructions for the Kelsey Hayes 325 antilock braking system ABS module. This unit has a common failure, causing the ABS pump to run continuously or generating a C0265 error code. This unit is in many Ford, General Motors GM, Dodge, Honda and Isuzu vehicles.
How To Remove ...http://circuitboardmedics.com/kelsey-hayes-325-abs-module-repa...
Our no-hassle warranty covers your repair for a full year. If the repair fails anytime within a year, we will repair the item again. In the rare occasion that the item is not repairable, we will either replace the circuit board entirely or refund the cost of the repair, at our discretion. See Details...