The 2005-2009 Polaris Ranger UTVs and 2006-2007 Polaris Sportsman ATVs all use a single module to control the major functions of the vehicle. The Power Distribution Module (PDM) is responsible for controlling the starter, fuel pump, display, charging system, and many other parts. Over the years, this module has been recognized as a common failure point, leading to a lot of frustration among Polaris owners. We’ll walk you through the common symptoms of a faulty PDM to help you diagnose your issues and then show you the best way to get your Polaris back up and running smoothly.

How To Know if a Polaris PDM is Bad

The most common problems associated with a faulty PDM are: the vehicle won’t start, the display is intermittent or completely out, or the alternator isn’t charging the battery. Because the PDM controls a wide range of functions, there may be other issues as well. The module can fail for a variety of reasons such as faulty components, broken connections, and water damage.

Due to the harsher conditions that ATV and UTV vehicles experience, it can be difficult to diagnose electrical problems. Physical damage to wiring as well as water intrusion of electronics can be culprits, so it’s important to double check your diagnosis when looking for a fix.

How to Fix a Polaris Ranger or Sportsman PDM

Unfortunately, dealing with a failed PDM can be a frustrating endeavor. Depending on the model, PDMs can be quite expensive, and used modules are always a gamble. In addition, there are a variety of part numbers – each made for a specific type of vehicle, so finding the exact part is crucial. Thankfully, we’ve developed a solution to rebuild your PDM ensuring it will be the right match. We fully remanufacture Polaris PDMs to function better than new – fixing your current issues and preventing future failures. This rebuild will not only save you time and money, but also ensure that you don’t have to worry about compatibility issues.

Why Choose Circuit Board Medics?

At Circuit Board Medics, we specialize in the diagnosis and repair of a wide variety of electronic modules. From automotive and appliance to semi-trucks, tractors, ATVs, and wheel loaders, we remanufacture all types of control modules. When you send your module to us, you get the benefit of dealing with a highly skilled team backed by over a decade of experience diagnosing and fixing faulty modules. We have a deeper understanding of what causes the failure, which allows us to reliably deliver consistent solutions.

We pride ourselves on quality repairs that will stand the test of time, and with a standard 24-hour turnaround time, you can have confidence that you’ll be back up and running quickly.

An Easy Fix for Polaris PDMs

When you’re dealing with ATV or UTV issues, you want to make sure they are fixed the right way. You never want to be stranded in a difficult situation with no quick fix. If you have a faulty PDM that you would like to have repaired, check out our PDM rebuild service or give us a call at (800) 547-2049. We’re here to restore your vehicle so you can keep driving with confidence.